The evolving oscillations of a Sun-like star

Follow a star of one solar mass from the pre-main sequence, through the main sequence, to the lower red giant branch. Each step of the slider is one model: its place on the H–R diagram, its internal structure, where waves can travel inside it, and its oscillation frequencies.

Drag the slider, press Play, or use the ← → keys. Click a grey dot on the H–R diagram to jump to that model. Hover any panel for values.

Model
–
Age
–
Teff
–
Radius
– R☉
Central H, Xc
–
νmax
–
Δν
–
ε
–

Loading model data…

H–R diagram

  • Evolutionary track
  • Selected model: colour shows Teff4,300 K5,900 K
  • Size shows radius1 R☉

Simulated light curve

  • –

Simulated power spectrum

  • Simulated
  • Expected, smoothed over Δν
  • νmax
  • –

Temperature–density structure

  • Selected model, centre at upper right

Propagation diagram

  • N, buoyancy frequency
  • S1, Lamb frequency (ℓ = 1)
  • νmax
  • p-mode cavity
  • g-mode cavity

Échelle diagram

  • ℓ = 0
  • ℓ = 1
  • ℓ = 2
  • νmax
Mode frequencies of the selected model (table)
ℓν [μHz]ν mod Δν [μHz]

How to read the panels

H–R diagram
The full evolutionary track. Grey dots are the models whose oscillation frequencies were computed. The selected model is drawn as a star: its colour follows its effective temperature, and its diameter is proportional to its radius (1 R☉ is shown in the legend), so you can watch it swell into a red giant.
Simulated light curve
What a space telescope would record for this model: stochastically excited oscillations, granulation and photon noise, shown over its first 3 days on a fixed flux scale, so you can see the variability grow as the star evolves. The full simulation has 65,536 points at a one-minute cadence, similar to Kepler's short cadence, so it spans 45.5 days for every model. It is illustrative rather than a fit to a real star. Every model gets its own independent noise, as separate observations would, but the same model always shows the same realisation.
Simulated power spectrum
The power spectrum of the full simulated light curve (grey) and the expected spectrum without noise, smoothed over one large separation Δν (black), so the hump shows the envelope rather than single peaks. Each frequency bin scatters about the expected value as χ² with two degrees of freedom, as for stochastically excited oscillations. Granulation dominates at low frequency and the oscillation hump sits at νmax, sliding to lower frequency and growing as the star evolves. Radial-mode amplitudes follow a power law in νmax through the Sun and Kepler red giants (Yu et al. 2018), and their linewidths a power law in Teff through the Sun and red giants (Vrard et al. 2018). Dipole and quadrupole modes use the visibilities measured by Kepler (Mosser et al. 2012). Mixed modes have their squared amplitude and linewidth divided by their inertia relative to radial modes (Grosjean et al. 2014), so g-dominated modes are narrow and often unresolved. The background has three Harvey profiles: the two granulation components of Kallinger et al. (2014), and a slower one at low frequency, scaled from the Sun's irradiance spectrum (Aigrain et al. 2004), all scaling with νmax.
Temperature–density structure
Temperature against density through the star, from the centre (upper right) to the surface (lower left). The dashed lines mark where radiation pressure equals gas pressure and where electrons become degenerate, drawn for a fixed solar-like composition as a guide.
Propagation diagram
Pressure (p) modes travel where the frequency is above both N and S1 (orange shading); gravity (g) modes travel where it is below both (blue shading). Between the two cavities the waves are evanescent. The shading uses the local, short-wavelength form of the dispersion relation for ℓ = 1, and ignores the acoustic cutoff that also bounds the p cavity near the surface. Hover the diagram to see which cavity νmax falls in at each depth. On the main sequence N stays well below νmax. After core hydrogen is exhausted the core contracts, N rises above νmax, and dipole modes near νmax take on both p and g character: mixed modes. Gaps in N are convective zones.
Échelle diagram
Frequencies cut into slices of the large separation Δν and stacked, so modes of each degree ℓ line up in near-vertical ridges. The frequency axis spans νmax ± 3.2σ, where σ is the width of the oscillation envelope, so it follows νmax smoothly as the star evolves. For ℓ = 1 and 2 the marker size follows the mode inertia relative to radial modes at the same frequency: full-size markers are p-like, small dots are g-dominated mixed modes. Δν and ε come from a straight-line fit to the radial modes, weighted toward νmax.

Model: 1.0 solar mass, X = 0.7196, Z = 0.0165, mixing length α = 1.71, evolved with YREC. Adiabatic frequencies computed with GYRE. Curves are simplified to screen resolution for the web.